D T P 3 4 D E N S I T O M E T E R
9
Spot Measurement
Your QuickCal Densitometer is designed to read spots, single readings of specific locations. This feature can be
manually activated or if supported, activated by your software application. Refer to your software program
documentation to see if this feature is supported.
To manually activate this feature, scan the “Spot Read” X-Rite
Setup Barcode enclosed.
1. Select a desired target of at least .5
″
(12.7mm) diameter.
2. Position the instrument to line up the center of the target with the instrument centering alignment marks and
center notch. The instrument may be placed or rolled into position over the target.
3. Press and release the instrument button.
4. A successfully reading is verified by a beep and solid green LEDs on the instrument, or a conformation message
on the computer monitor.
Centering Alignment Mark
Center Notch
Desired Target, .5”
(12.7mm) minimum
