X-PERFORMER XPCACG20LI, Original Instructions Manual

Page: 43 / 60

lights on the battery charger provide detailed diagnostics during the battery charging phase.
Observe all the warning messages relating to the battery charger in this manual
6. SERVICING INSTRUCTIONS
These instructions are intended to be used only by competent persons and they shall provide
detailed instructions for carrying out all servicing operations authorized by the manufacturer.
All special tools, materials or servicing aids necessary for the correct servicing of the
appliance shall be specified
In particular, the instructions shall specify:
a) that the appliance be checked for soundness
b) where applicable, that the appliance be checked for setting pressure
c) the method for verifying the correct operation of the burner:
d) the precautions to be taken if the appliance cannot be left in a safe condition;
e) Package included: 1 set of regulator and hose, 1 pc heater body and 1 pc handle.
7.ELECTRICAL POWER SUPPLY
HEATER POWERED WITH THE RECHARGEABLE BATTERY (when applicable) Or
AC100-240V 50/60Hz ;
USE ONLY ORIGINAL RECHARGEABLE BATTERIES WITH THE VOLTAGE RATING IN
DICATED ON THE TECHNICAL DATA PLATE AFFIXED TO THE HEATER.
Charing the rechargeable battery by charger, Connect the charger to the battery
charging port (
Figure.9)
The rechargeable battery (provided in the pack and/or on request, depending on the model) i
s provided partially charged. In order to guarantee the full power of the rechargeable battery
, charge it fully using the original battery charger before initial use (each battery needs its spe
cific battery charger). The rechargeable battery charging only within the temperature range of
10 and 40*C. This ensures the long life-span of the rechargeable battery.
The charger’s light is red when charging and turn to Green when fully charged
Figure.9