3
Compatible Accessories
Please visit the Accessories page on our website for details on the following.
Tall and wide keycaps
Colored and transparent key caps
Blank key blockers
Other Products from P.I. Engineering
X-keys XK-24
– 24 programmable keys
X-keys XK-60
– 60 programmable keys
X-keys XK-80
– 80 programmable keys
X-keys XK-128
– 128 programmable keys
X-keys XK-12 Joystick
– 12 keys with a precision joystick
X-keys XK-12 Jog & Shuttle
– 12 keys with jog & shuttle
X-keys XK-12 Touchpad
– 12 keys with touchpad
X-keys XK-3 Foot Pedal
– three programmable pedals
X-keys XK-4 Stick
– four programmable keys
X-keys XK-8 Stick
– eight programmable keys
X-keys XK-16 Stick
– sixteen programmable keys
X-keys XK-68 Jog & Shuttle
– 68 keys with jog & shuttle
X-keys XK-68 Joystick
– 68 keys with a precision joystick\
X-keys Matrix Board
– 128 switch points
Y-mouse PS/2 to USB adapter
FCC Declaration of Conformity
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
residential installation. This equipment generates, uses, and can radiate radio frequency
energy and if not installed and used in accordance with the instruction manual may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio TV technician for help.
Any changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.