X-IO ISE-2 Series, User Manual

Page: 164 / 178

Page 156 160337-000 Rev D, 30 September, 2013 Xiotech—Proprietary
ISE User Guide Appendix A: Quick Start
5. Click
SUBMIT
and the
Host Summary
view appears, showing the hosts that have been created.
6. To create additional hosts, repeat Step 1 through Step 5 in this procedure until all desired hosts have been
created.
Create Storage Volumes
This section briefly describes the steps to create storage volumes. For more detail on this process, see
“Creating Volumes” on page 58.
1. Select
Storage
>>
create volume
from the navigation bar on the Web-Mgt.
The
Storage Configuration
view appears.
2. Enter a unique volume name, select the
Cache Policy
, and select an available pool, the RAID level, and the
size.
3. Create a volume-host mapping scheme by selecting the appropriate hosts from the
Available Hosts
list and
clicking
Add
to add them to the
Selected Hosts
list.
4. Click
SUBMIT
.
The
Volume Summary
view appears, showing the volumes that have been created with the volume-host
mapping.
5. To create additional volumes, repeat Step 1 through Step 4 in this procedure until all desired volumes have
been created.
Customize and Maintain
With the ISE configured, other procedures are available to further customize and maintain the ISE:
•
Set up SNMP traps, destinations, and contacts and view or download the MIB file (“SNMP Setup” on
page 53)
• Add or modify existing system, host, and storage configurations (“Volume and Host Configuration” on
page 75)
• Display setup, configuration, and status information about the system, storage, hosts, environment,
events, performance, and more (“Monitoring” on page 101)
• Perform maintenance activities (“Maintenance” on page 125)