12
X GLOO
®
•
Windeckstr. 4
•
83250 Marquartstein
•
Germany
5. ELEMENTS
5.1 WALLS
The Universal Wall of the XE series offers the option of
a wall that can be opened on both sides. This means it
can be used multifunctionally as an Entrance- and
Standard Wall.
5.1.1 ATTACHING THE WALLS
Attach the wall to the tent by connecting the zippers at
the top of the wall and then closing them toward the
bottom on both the right- and left sides.
5.1.2 ATTACHING THE WALLS WITH THE CLO-
SING ROD
The closing rod is an available accessory for easier
opening and closing of the side walls. The hook of the
closing rod can be hooked into the zipper pullers for
opening and closing.
The walls can also be attached inside-out. This makes
it possible to have the printed side of a wall face either
towards the inside or outside of the tent.
In windy conditions the zippers must always be closed
completely, even during setup, as they can otherwise
be damaged by wind loads being put on individual
teeth of the zipper.
5.1.3 OPENING AND SECURING THE WALL
Starting at the bottom of the tent tube, open the zipper
on the side of the wall that you want to open.
You can fix the wall at any postion along the zipper.
Hold the wall open by connecting the plastic toggle to
the loop in the center of the wall, or to the toggle on
the opposite side.
6. USE
6.1 GENERAL INFORMATION
• The inflatable X GLOO Event Tent is not intended for continuous use and should be
inspected for wear or damage after every event.
