630140_1
XFIRE_1200_GB_Manual_R
‐
emotion
10.0
Fixing the Fire to the base and wall:
It is a requirement that this fire be securely
fastened to the wall and base. Once the fire has
been pushed back into the correct position, use
wood screws (or other suitable fasteners) to fix
the fire to the cavity through each of the four
holes in the corners, as shown in the diagram to
the right.
Note: It may be necessary to use
washers on the
fasteners to securely fasten the
fire to the wall.
When fixing the fireplace in position ensure that
you leave a gap between the fireplace flange
and the framing timber for the wall lining, which
will be added at a later stage.
11.0
Removing the Firebox Glass:
Pull the four hooks shown below towards you and then away from the glass to release the
glass frame underneath the hook.
Do not operate the appliance if the glass has been broken, damaged, or the glass is
not properly positioned/hooked onto the appliance.
