Assembly Stage #2
1. Pull the cable (D-6) out of the handlebar post before assembling.
2. First, loosen the pre-assembled screws.
3. Connect the cable upper (D-6)by pushing the head into the notch of the cable lower (G-1) coming
from the main frame (see drawing). Connect the cables completely.
4. Put the cover (G-3) and handlebar post (D) into the main frame and fix it with 4 screws (D-1) and 2
curve washers (D-2).
5. Insert the axle (G-16) through the handlebar post.
A l l e n
K e y ( 1 )
B o x
S p a n n e r
( 1 )
