Firmware upgrade
1.
Turn off the X-CAM A10-3H
2.
Uses the USB cable to connect with your PC, Normally the windows can find the
driver automatically, you will find the PORT number in the device manager.
3.
Select the COM port number
4.
Open the firmware file ( *.bin )
5.
Click “Load and Connect” button
6.
Turn on the X-CAM A10-3H, it will upgrade the firmware automatically
Notice: Please do not touch anything and keep the power on during the upgrade, if
the upgrade is break please back to STEP 1 and try again, normally it could be fix
automatically. It will beep 4 times after upgrade and the system will be restarted.
Announcements
1.
Do not touch the gimbal during the initialization after turn on, Keep the gimbal in quietude
2.
Do not use BEC for the gimbal power, use 3~6S Lipo battery
3.
Strongly recommend using 12mm tube to mount the gimbal
4.
Make sure the center of gravity of the gimbal is correct before using.
保修及免责声明
The gimbals are covered by one year limited warranty. Please do not disassemble or modify mechanical structure in the
warranty period. The customized program of the control module is based on the gimbal structure and motors, and all
debugging has been completed in factory. Any direct or indirect damages caused by a user during use or damage will not be
covered by our warranty, and X-CAM will not compensate the loss and the corresponding liability.
X-CAM does not take any responsibility toward any damage or loss in using the gimbal.
产品保修登记：
http://warranty.x-camtech.com/cgi-bin/XCamWarranty.dll
