X-CAM A10-3H 3 Axis Gimbal for GOPRO
User Manual
( V2.00 )
The X-CAM A10-3H 3 Axis Gimbal has been setup and calibrated for use
with GOPRO cameras, it is ready to use straight from the box.
Specifications:
Weight: 280g ( without GOPRO )
Stabilization Frequency: 5200Hz
Input Voltage (DC IN): 7.4v ~ 22.2v ( 2S ~ 6S Lipo )
Tilt Travel: +-90 degrees; Rolling Travel: +-45 degrees
Pan Travel: 360 degrees with unlimited rotation
Built-in AV output & Camera Charging
Auto Pilot System support is not required
Built-in 2 X 6 Axis gyroscope sensors & 1 Infrared localizer.
Supports automatic back to HOME function.
Supports GoPro3,,GoPro4(black or silver version)
Package Contents
●
1 x X-CAM A10-3H Gimbal Frame
●
1 x X-CAM A10-3H Controller
●
1 x USB Cable
●
1 x PPM Cable
●
5 x Damping balls
●
4 x Rubber rings
●
4 x Fastener rings.
Connection Instructions
The S-BUS input is required for full functionality. The channels
are:
Channel 1: ROLL
Channel 2: Return to HOME
Channel 3: TILT
Channel 4: PAN
Channel 5: Mode Switch
The recommend operation methods:
1. Single control: Just connect a PPM channel for PAN control
or HEAD FOLLOWING , HEAD LOCK and AUTO BACK TO
HOME mode(
Default
), S-BUS connection is not required,
One receiver only.
2. Dual control: Only S-BUS input mode provides full
functionality, 2 receivers are required.
Notice: You do not have to provide power to the S-BUS Receiver. The A10-3H Controller provides a 5V supply via the S-BUS input. The TILT
and Pan axis (or Mode Switch) can be controlled under the single control or dual control.
