In the Wyze app, tap the +
plus sign, then Add Device >
Power & Lighting > Wyze Plug.
Follow the instructions in the
Wyze app to complete setup.
SETUP
Download the Wyze app and
sign in or create an account.
1
Insert Wyze Plug into an outlet.
2
3
4
The status light will flash blue
to show that it's in pairing mode.
If it isn't flashing blue, press and
hold the Power button until it
begins to flash blue.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
this equipment. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired
operation. This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING:
