WYTRON CD-398, Operation Manual

Page: 35 / 58

35
After completing the password changing, system will record
the 4 digits password and when you reboot the machine or
need to change the password again, system will ask you to
input the current password for identification.
Password can be changed again by setting Yes to the
Change Password function but the current password must
be input correctly first. If user wants to disable the password
function, simply set the password to 0000 and then the
password function will be deactivated (0000 cannot be set
as password).
Wrong password input during the booting stage will cause
the hang of duplicator and freeze all operation. User must
restart the machine to input the correct password again.
6.1.20 Startup Command
This setting specifies the first function appeared when
duplicator is turned on so as to avoid repeated selection all
the time.
Press MODE switch to change and GO to exit.
6.1.21 CD to CD (if HDD installed)
This setting controls the source location of master data.
Select “Yes” to bypass the existing hard drive and you can
copy directly from CD/DVD to CD/DVD or select “No” to
copy CD/DVD from data stored in current partition of hard
drive. This option setting will not be saved and will be
restored to “NO” during rebooting of duplicator. You will
have to change the setting again after rebooting if you wish