background image

Solar Powered Wi-Fi Camera WWC500               User Manual  V1.00 

10 

4. Use AP hotspot  

The camera is implemented with Wi-Fi hotspot access function. It works out when the Wi-Fi configuration has 
not been set yet, or after reset to factory default mode.  Mobile phone can find it on Wi-Fi settings, and get 
connected with it. Once connected, video can be watched on the phone.  

1. Switch on the device, the red lump twinkles slowly(if the indicator light is under other status press the reset 
key for 5 seconds after switching on and reset to factory default mode), open the mobile APP (TOSEE), click to 
add the device, click Next, find the WIFI hotspot starting with TOSEE and click Connect.  

2. After the connection is successful, back to the TOSEE software, click the two red letters “AP” in the upper 
right corner, switch the app to AP mode.   

3. Set the camera WIFI hotspot password, this password needs to be remembered, then set the device 
administrator password, and set the device name; WIFI hotspot password is Wi-Fi password which have to be 
input when connect it next time, it is same as other Wi-Fi routers.  

4. Back to app main screen, click on the camera thumbnail, wait 3-5 seconds to watch camera live video. 

5. FAQ 

Q1. What is the effective sensing distance, angle of the camera?  

A: The sensing distance is within 10 meters, the scene available for shooting is 50 meters, and the angle is 120 
degrees. 

Q2. Can it be used if there’s no electricity and network available?  

A: Yes, as it is powered from 2x2000mAH lithium batteries, which are by solar panel. 

Q3. Can it be monitored remotely by the mobile phone? How do I watch the video?  

A: Yes, the camera is built for monitoring view from phone via internet as long as the camera is connected to 
network by Wi-Fi. If there is no network at the installing location, mobile phone can access it directly when the 
phone connect to camera by camera hotspot.  

Q4. How long can it be used in places where there’s no light? 

A: It can takes about 1500 video clips if there’s no light after charged battery for 2 or 3 days. Theoretically, it 
will never power off after being installed as long as the camera is installed at outdoor. 

Q5. How many wattages is solar panel?  

A: 2.2 watts  

Q6. What is the video clip length?  

A: Can select from 15, 30, or 45 seconds.  

Q7. How long does the 32G memory card last? Is the automatic cyclic coverage available after memory is full?   

Summary of Contents for WWC500













Reviews: