Network Video Recorder Start Guide Ver1.0
10
/
16
4.2 Getting Started the NVR
Step 1: Connect NVR to monitor
Step 2: Connect power adaptor.
The boot screen will be displayed after the device is turned on. After waiting for few minute, the boot can
be successful.
4.3 Setup Wizard
After the device is turn on, it will enter the setup wizard page, if there is no hard disk or the hard disk
is not formatted, the device will prompt, and the buzzer will alarm
Click change password box to change password
Note: If user does not click change password, then enter admin password to next step
The default account is "admin", no password for default account. To protect your personal privacy
and data, it is recommended to modify the default password
Click [
next]
button, this page allows some simple configuration of the NVR: Modify language,
change time, open/close wizard, open /IPC time synchronization function
.
