3
Chapter 2
Installing the Kit into the 9455XL Platform
Perform a proper shutdown of the terminal by ending your session and clicking the
buttons as they appear.
Unplug the power supply and remove all of the cables from the rear of the unit.
Remove the top cover from the 9455XL using the following steps:
Remove the top cover by removing the three screws applying pressure using the palm of
your hand as shown in Figure 5.
Figure 5
Remove the CDROM bracket by removing the two screws as shown in Figure 6 below.
Figure 6
Remove these three
screws and apply
pressure with the palm
of your hand in the
direction of the arrow.
Remove the
CDROM bracket by
removing the two
Philips screws.
