Wyse 3315SE, Reference Manual, Page: 29 / 260

5
UI Menu Control
Table 1-2 describes the command buttons used for UI menu control on a 3000
series WBT.
Table 1-2 UI Menu Control
Command Button Function
X Found in the upper right corner of a dialog box. Click on
this command button to quit a dialog box or properties
sheet without saving changes.
OK Found in dialog boxes and on properties sheets. Click
on this command button to save your changes and quit
a dialog box or properties sheet.
Cancel Found in dialog boxes and on properties sheets. Click
on this command button at any time to quit a dialog box
or properties sheet without saving changes.
Apply Sometimes not activated and found in dialog boxes and
on properties sheets. Click on this command button to
save changes without quitting a dialog box or
properties sheet.
Next or Accept Found in wizards. Click on these command buttons to
display the next dialog box in the sequence.
Back Found in wizards. Click on this command button to
return to the previous dialog box.
Finish Found in wizards. Click on this command button to
return to finish the wizard.