Wyse 3315SE, Reference Manual, Page: 131 / 260

22
ICA Connections
Use the Specify Connection Type dialog box to start configuring an ICA
connection. ICA connects to a server running Citrix WinFrame or MetaFrame.
Using the Specify Connection Type Dialog Box
Figure 22-1 shows the Specify Connection Type dialog box.
Figure 22-1 Specify Connection Type Dialog Box
•
Network Connection
• Click on this radio button to create a network ICA connection. This type of
connection requires a direct line to the network, such as 10Base-T. See
“Network Connections.”
•
Dial-In Connection
• Click on this radio button to create a serial ICA connection. This type of
connection is made using a modem. See “Dial-In Connections.”