Wyse 3230LE, User Manual

Page: 62 / 84

44
Chapter 6
Table 6-1 identifies and describes each of functions of the properties sheet.
Ending a Connection
Click on the End command button to end the connection process. When you press the
End button and the connection is active, the End Task dialog displays. The End
command button is enabled when one or more sessions become active.
Table 6-1 Connections Properties Sheet
Function Description
Connection Name This application window lists the connections that you can
use.
Default RDP Connection and Default ICA Connection
are the default connections for the window.
Note
See the administrators guide for information
about creating connections.
Type This list shows the type of connection. The defaults are RDP
and ICA .
Status This list shows the status of the connection. If a connection is
live, the status for that connection will be
Active . If a
connection is not live, the list will show a blank.
Connect Click on a connection in the Connection Name list box to
highlight it. Click on the Connect command button to make
the highlighted connection. You can also double-click on a
selection to make a connection.
End See Ending a Connection.
Shutdown See Shutting Down the Terminal.