Wyse 3230LE, User Manual

Page: 35 / 84

2
General Terminal Information
Logging On
If security is enabled (an administrative function), when you turn on your WBT the
Terminal Login dialog box shown below (see Figure 2-1) displays (unless your system
administrator has configured your terminal for automatic login with your User Name and
Password). Type in your user name and password, then click the OK button.
Figure 2-1 Terminal Login Dialog Box
If security has not been enabled or your terminal has been configured for automatic login,
the
Winterm Connection Manager (Figure 2-5) is the first screen you will see after your
terminal boots. From the connection manager press F2 to display the Terminal
Properties dialog box.
Two of the properties sheets in this dialog box provide general information about your
WBT. They are the
General properties sheet and the SysInfo properties sheet. The
following paragraphs discuss these properties sheets.