Copyright © 2015 WyreStorm Technologies |
SW-0402-MV-HDxx Quickstart Guide | 160330
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
2 of 4
Front Panel
Rear Panel
IR Sensor
38kHz IR Receiver.
Receives an IR signal from the included handheld remote or emitter for source selection and other switcher functions.
Input 1-4 Selection
Selects the numbered input to assign to an output.
Source Selection
Selects the source for the currently selected input number.
Example: HDMI 1, VGA 2, etc.
MV Mode
Selects the MV mode for the currently selected source.
2K QV/4K QV
Selected 2K or 4K output for the currently selected source.
LCD Display
Displays current source selection and source type for each output.
LAN
8-pin RJ-45 female | 10/100 Mbps auto-negotiating
Connect to a Local Area Network for accessing the built-in Web UI.
RS-232 In/Loop
RS-232 Loop:
9-pin DB9 Male
RS-232 In:
9-pin DB9 Female
Connect to a control system to control the switcher and loop to other switchers. See
section.
YUV/ CVBS
(Component/Composite
Video)
RCA Female(3x)
Connect YUV to the component video output of a source device.
Connect CVBS (YUV Green) to the composite video output of a source device.
Audio In
(CVBS Audio)
RCA Female (2x)
Connect to the analog audio output of the source connected to the CVBS input.
S/PDIF Out
RCA Female (Digital Coax)
Outputs a digital S/PDIF audio signal to the display or amplifier with a digital coax input..
IR Ext
3.5mm (1/8in) Stereo Plug
Connect to an IR receiver (not included) when the switcher is placed in a cabinet or out of range of the IR remote.
See
HDMI In
19-pin type A HDMI female digital video/audio: Supports HDMI and DVI/D (requires adapter-not included).
Limited to 297MHz pixel clock
Line In (VGA Audio)
3.5mm (1/8in) Stereo Plug
Connect to the analog audio output of the source connected to the VGA input.
VGA In
15-pin VGA VESA (D-SUB 15):
Connect to D-SUB 15 VGA output of a device such as a computer.
15-pin VGA cable is required.
HDMI Out
19-pin type A HDMI female digital video/audio: Supports HDMI and DVI/D (requires adapter-not included).
Limited to 297MHz pixel clock.
HDBT Out
8-pin RJ-45 female
Connect to the HDBT In of an HDBaseT receiver. See
for important wiring guidelines.
Power In
5.5mm Male Barrel Jack
Connect to the included 12V DC 3A (SW-0402-MV-HDMI) or 12V DC 4A (SW-0402-MV-HDBT) Power Supply.