background image

10

Technical Support: [email protected] US: +866 677 0053 EU: +44 (0) 1793 230 343

MAINTENANCE AND PRODUCT SER

VICES

14.     Product Services

15.     Mail-in-service

13.     Maintenance

• All WyreStorm equipment support HIGH-SPEED 

(or “category 2”) HDMI cables that have been tested 

to perform at speeds of 340Mhz or up to 10.2Gbps, 

which is the highest bandwidth currently utilised over 

an HDMI cable and can successfully handle 1080p 

signals including those at increased color depths and/

or increased refresh rates from the Source. High-Speed 

cables are also able to accommodate higher resolution 

displays, such as WQXGA cinema monitors (resolution of 

2560 x 1600).

What about screens with different 

resolution capabilities?

When sending a signal point to point a TV will 

communicate it’s capabilities to the source, then the 

source will output a suitable signal that compatible (i.e. 

1080p Stereo audio). If you were to use a matrix switch 

with three 1080p screens and one 1080i screen, the 

resultant image would be 1080i across all screens. The 

matrix switches do not scale per output but instead 

negotiate with the source a signal that all screens are 

capable of supporting.

How do WyreStorm devices handle HDCP?

HDCP (High Definition Copyright Protection) is a feature 

built in to HDMI devices to prevent theft of or illegal 

distribution of HD content. Unlike competing products,

WyreStorm devices are legal and comply with HDCP 

regulations. They do this by assigning a “key” to every 

display connected to the switch. HDCP “keys” are 

assigned to a display when connected to a HDMI device 

normally. This doesn’t change when connected to a 

switch; it just assigns more of them.

I can get 1080i but not 1080p at a TV 

location

Firstly ensure that both the source is outputting 1080p 

and that the TV is Full HD 1080p screen. If this is the 

case then the receiver may need setting up for long cable 

mode using the DIP switches. This useful feature uses an 

alternative Equalisation method to re-sync the signal over 

longer distances. (feature available on selected models)

I cannot get a signal out from my A/V receiver along 

a Cat 5e extender set

Check to ensure that the A/V Receiver isn’t adding CEC

(HDMI Control Protocol) to the outgoing signal, this can 

sometimes have an effect on the HDMI signal.

Clean this unit with a soft, dry cloth only. Never use 

alcohol, paint thinner or other harsh chemicals.

Provided Service:

1. Damage requiring service:

 This unit should be 

serviced by a qualified service personnel if:

• The DC power supply or AC adaptor has been

   damaged.

• Objects or liquid have gotten into the unit.

• The unit has been exposed to rain.

• The unit does not operate normally or exhibits a marked

   change in performance.

• The unit has been dropped or the cabinet damaged.

2. Servicing Personnel:

 Do not attempt to service the 

unit beyond that described in these operating instructions. 

Refer all other servicing to authorised servicing personnel.

3. Replacement Parts:

 When parts need replacing, 

ensure parts approved by the manufacturer are used 

– either those specified by the manufacturer or parts 

possessing the same characteristics as the original parts. 

Be aware – unauthorised substitutes may result in fire, 

electric shock, or other hazards and will invalidate your 

warranty.

4. Safety Check:

 After repairs or service, ask the service

personnel to perform safety checks

When shipping the unit, carefully pack and send it 

prepaid, with adequate insurance and preferably in the 

original packaging. Please include a document or letter 

detailing the reason for return and include a daytime 

telephone number and/or email address where you can 

be contacted.

If repair is required during the limited warranty period, 

the purchaser will be required to provide a sales receipt 

or other proof of purchase, indicating date and location 

of purchase as well as the price paid for the product. 

The customer will be charged for the repair of any unit 

received unless such information is provided.

Should you feel your product does not function 

adequately due to defects in materials or workmanship, 

Summary of Contents for SW-0201-POH













Reviews: