EDID Settings
• EDIDs can be configured to resolve issues with video output on displays that may not accept the maximum resolution available from the source.
• Ensure that a display is connected and powered On to the selected output before copying EDIDs or the copy will fail. When this occurs, EDID will be set to
1080p @60Hz 2ch.
• Power to the splitter must be cycled (Off/On) after changing dip switches in order for the setting to take effect.
Copying EDIDs
1. Connect a source and an HDBaseT receiver to output 1.
2. Connect the highest resolution display to the HDBaseT receiver.
3. Power on the source, display, and splitter.
4. After a few moments the EDID from the display will be configured.
Note:
If the EDID copy fails, the EDID will be set to 1080p @60Hz 2ch.
Troubleshooting
No or Poor Quality Picture (snow or noisy image)
• Verify that power is being supplied to all devices in the system and that they
are powered on.
• Verify that all source and HDBaseT connections are not loose and are
functioning properly.
• Verify that the HDBaseT cable is properly terminated per the
section.
• Verify that the splitter, receiving device, and display support the output
resolution of the source.
• Refer to Video Resolutions in the
table before determining
cable type and length.
• Verify that the cable length matches the HDBT Out port distances. See
HDBaseT Out Resolution Distances
• If transmitting 3D or 4K, verify that the HDMI cables used are 3D or 4K rated.
No or Intermittent 3
rd
party Device Control
• Verify that the IR cable(s) is properly terminated.
• See
• Verify that the IR emitter is located near the IR receiver on the device.
Troubleshooting Tips:
• WyreStorm recommends using a cable tester or connecting the cable to
other devices to verify functionality.
• Use a flashlight to locate the IR receiver behind any tinted panels on the
device being control
Copyright © 2017 WyreStorm Technologies |
SP-0208-HDBT-H2 Quickstart Guide | 171101
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
3 of 4
EDID Copy from HDBT Out 1
4K UHD
1080p
Copy from HDBT Out1 (default)
4K @30Hz 8bit 2ch
1080p @60Hz 2ch
4K @30Hz 2ch
1080p @60Hz 5.1ch
4K @30Hz 5.1ch
1080p @60Hz 7.1ch
4K @30Hz 7.1ch
