Specifications
Copyright © 2019 WyreStorm Technologies |
RXV-70-4K-G2 v1 Quickstart Guide | 190620
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
4 of 4
Audio and Video
Inputs
1x HDBT In: 8-pin RJ-45 Female
Outputs
1x HDMI Out: 19-pin type A
Output Video Encoding
HDBaseT Class A
Encoding Data Rate
9.2Gbps
End to End Latency (Max)
10μs (micro seconds)
Audio Formats
HDMI: 2ch LPCM | Multichannel up to Dolby Atmos and DTS-X
Video Resolutions (Max)
Video Resolution
HDMI
Cat6
Cat6a/7
1920x1080p @60Hz 12bit
15m/49ft
100m/328ft
100m/328ft
1920x1080p @120Hz 12bit
7m/22ft
70m/230ft
100m/328ft
3840x2160p @24Hz 10bit 4:2:0 HDR
15m/49ft
100m/328ft
100m/328ft
3840x2160p @30Hz 8bit 4:4:4
7m/22ft
70m/230ft
100m/328ft
3840x2160p @60Hz 10bit 4:2:0 HDR
5m/16ft
70m/230ft
100m/328ft
3840x2160p @60Hz 12bit 4:2:2 HDR
5m/16ft
70m/230ft
100m/328ft
4096x2160p @60Hz 8bit 4:2:0
7m/22ft
70m/230ft
100m/328ft
Note: WyreStorm recommends the use of shielded category cable to minimize signal noise and interference
Supported Standards
DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100
Maximum Pixel Clock
HDMI: 600MHz | HDBaseT: 297MHz
Communication and Control
HDMI
HDMI 2.0 | HDCP 2.2 | EDID | CEC | DVI/D supported with adapter (not included)
HDBaseT
HDMI 2.0 | HDCP 2.2 | EDID | CEC | 1-way PoH | Bidirectional IR
CEC
CEC power triggering for connected screens – Requires CEC compatibility
IR
1x IR TX: 3.5mm (1/8in) TS Mono | 1x IR RX: 3.5mm (1/8in) TRS Stereo | Bidirectional over HDBaseT
RS-232
1x RS-232: 3-pin Terminal Block - 3.5mm
Power
Power Supply
18V DC (Optional)
PoH
1-way Matrix to Receiver
Max Power Consumption
12.42W
Environmental
Operating Temperature
0 ~ +45°C (32 ~ +113 °F), 10% ~ 90%, non-condensing
Storage Temperature
-20 ~ +70°C (-4 ~ +158 °F), 10% ~ 90%, non-condensing
Maximum BTU/hr
43 BTU/hr
Dimensions and Weight
Rack Units/Wall Box
<1U
Height
15.2mm/0.6in
Width
136.4mm/5.38in
Depth
74.2mm/2.93in
Weight
0.24kg/0.53lbs
Regulatory
Safety and Emission
CE | FCC | RoHS | RCM
Warranty Information
This product is covered by a 5-year limited parts and labor warranty. During this period there will be no charge for unit repair, component
replacement or complete product replacement in the event of malfunction. The decision to repair or replace will be made by the
manufacturer. This limited warranty only covers defects in materials or workmanship and excludes normal wear and tear or cosmetic
damage.
Visit the product page located at
for additional information on this product including important technical information not
provided in this document and warranty terms & conditions.
Note:
WyreStorm reserves the right to change product specification, appearance or dimensions of this product at any time without prior notice.
