Wyrestorm RXV-35-4K v1 Quick Start Manual Download Page 4

Specifications

Copyright © 2019 WyreStorm Technologies | wyrestorm.com
RXV-35-4K v1 Quickstart Guide | 190501

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973) 

[email protected]

4 of 4

Audio and Video
Inputs

1x HDBT In: 8-pin RJ-45 Female

Outputs

1x HDMI Out: 19-pin type A

Output Video Encoding

HDBaseT Class B

Encoding Data Rate

9.2Gbps

End to End Latency (Max)

10μs (micro seconds)

Audio Formats

Analog: 2ch Analog
S/PDIF: 2ch LPCM | Dolby Digital/DTS up to 5.1ch
HDMI: 2ch LPCM | Multichannel up to Dolby Atmos and DTS-X

Video Resolutions (Max)

Video Resolution

HDMI

Cat6

Cat6a/7

1920x1080p @60Hz 12bit

15m/49ft

60m/197ft

70m/230ft

1920x1080p @60Hz 16bit

7m/23ft

60m/115ft

70m/131ft

3840x2160p @24Hz 10bit 4:2:0 HDR

3m/10ft

35m/115ft

40m/131ft

3840x2160p @30Hz 8bit 4:4:4

7m/23ft Input

15m/49ft Output

35m/115ft

40m/131ft

3840x2160p @60Hz 10bit 4:2:0 HDR

3m/10ft

35m/115ft

40m/131ft

4096x2160p @60Hz 8bit 4:2:0

7m/23ft

35m/115ft

40m/131ft

4096x2160p @60Hz 8bit 4:4:4

3m/10ft

35m/115ft

40m/131ft

Note: WyreStorm recommends the use of shielded category cable to minimize signal noise and interference

Supported Standards

DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100

Maximum Pixel Clock

HDMI: 600MHz | HDBaseT: 297MHz

Communication and Control
HDMI

HDMI 2.0 | HDCP 2.2 | EDID | CEC | DVI/D supported with adapter (not included)

HDBaseT

HDMI 2.0 | HDCP 2.2 | EDID | CEC | 1-way PoH | Bidirectional IR

CEC

CEC power triggering for connected screens – Requires CEC compatibility 

IR

1x IR TX: 3.5mm (1/8in) TS Mono
1x IR RX: 3.5mm (1/8in) TRS Stereo
Bidirectional over HDBaseT

RS-232

1x RS-232: 3-pin Terminal Block - 3.5mm

Power
Power Supply

18V DC (Optional)

PoH

1-way Matrix to Receiver

Max Power Consumption

12.42W

Environmental
Operating Temperature

0 to + 45°C (32 to + 113 °F), 10% to 90%, non-condensing

Storage Temperature

-20 to +70°C (-4 to + 158 °F), 10% to 90%, non-condensing

Maximum BTU/hr

43 BTU/hr

Dimensions and Weight
Rack Units/Wall Box

<1U

Height

15.2mm/0.6in

Width

136.4mm/5.38in

Depth

74.2mm/2.93in

Weight

0.24kg/0.53lbs

Regulatory
Safety and Emission

CE | FCC | RoHS | RCM

Warranty Information

WyreStorm Technologies LLC warrants that its products to be free from defects in material and workmanship under normal use for a 

period of five (5) years from the date of purchase. Refer to the Product Warranty page on 

wyrestorm.com

 for more details on our limited 

product warranty.

Note: 

WyreStorm reserves the right to change product specification, appearance or dimensions of this product at any time without prior notice.

Summary of Contents for RXV-35-4K v1

Page 1: ...entation and configuration tools Read through the Wiring and Connections section for important wiring guidelines before creating or choosing premade cables While this product supports CEC WyreStorm cannot guarantee compatibility with all forms of CEC communication In the Box 1x RXV 35 4K Receiver 1x IR Emitter 1x IR Receiver 2x Mounting Brackets 1x 3 pin Terminal Block 1x Quickstart Guide this doc...

Page 2: ...stablished Power Input 5 5mm Screw Down Barrel Jack Connect to the included 18V DC 1A power supply to the transmitter or receiver A power supply is not required on the other end as it will be powered using PoH HDBT In HDBT Out 8 pin RJ 45 female Connect the matrix HDBT Out to receivers HDBT In IR TX IR RX IR TX 3 5mm 1 8in Mono Jack Connect to the supplied IR emitter to control a local device from...

Page 3: ...ly to a NetworkHD system as an incompatibility may exist WyreStorm offers a cable that compensates for voltage differences as well adjusts for differences in the pins used within the port Refer to the CAB IR LINK product page for more information IR TX Port Pinout Connection for IR TX transmit uses a 3 5mm 1 8in mono plug Tip Anode Sleeve Cathode IR Signal IR RX Port Pinout Connection for IR RX re...

Page 4: ...to 30Hz HLG BT 2020 BT 2100 Maximum Pixel Clock HDMI 600MHz HDBaseT 297MHz Communication and Control HDMI HDMI 2 0 HDCP 2 2 EDID CEC DVI D supported with adapter not included HDBaseT HDMI 2 0 HDCP 2 2 EDID CEC 1 way PoH Bidirectional IR CEC CEC power triggering for connected screens Requires CEC compatibility IR 1x IR TX 3 5mm 1 8in TS Mono 1x IR RX 3 5mm 1 8in TRS Stereo Bidirectional over HDBase...

Reviews: