Page 4
①
RS232 port.
②
LAN port.
③
DIP switch for EDID setting.
④
Power input.
⑤
IR extension.
⑥
Output 1 with HDMI and CAT5E.
⑦
Output 2 with HDMI and CAT5E
⑧
HDMI Input 1 to 4.
⑨
IR emitter 1 to 4.
⑩
IR receiver 1 to 4.
⑪
Output 3 with HDMI and CAT5E.
⑫
Output 4 with HDMI and CAT5E.
NOTE:
RS232 port and LAN port are for matrix control. The LAN port is connected to
the computer via direct UTP and connected to the router via cross UTP.
■
Installation
①
Connect the HDMI input sources (
such as HD-DVD, PS3, STB etc)
into MX0404-HDC.
②
Connect the HDMI outputs (
such as HD-LCD, HD-DLP) into
MX0404-HDC.
③
Use the HDMI cable to connect local HDMI sink device (
near to the
matrix) to MX0404-HDC. Use UTP cable to connect remote HDMI sink
devices to MX0404-HDC.
④
Power on the input source you want to show.
⑤
Connect the power supply into MX0404-HDC and turn on the display you
want to watch.
⑥
Use remote or push the button to choose input source. Extra infrared
receiver extension, IR emitter and RS232 port are supplied for remote
control.
