Warranty Information
This product is covered by a 3 year limited parts and labor warranty. During this period there will be no charge for unit
repair, component replacement or complete product replacement in the event of malfunction. The decision to repair or
replace will be made by the manufacturer. This limited warranty only covers defects in materials or workmanship and
excludes normal wear and tear or cosmetic damage.
Visit the product page located at
for additional information on this product including important
technical information not provided in this document and warranty terms & conditions.
Specifications
Audio and Video
Inputs
6/8x HDMI 19-pin type A
Outputs
6/8x HDMI 19-pin type A 6/8x HDBaseT
8-pin RJ-45 female
Audio Formats
2ch analog and Up to 7.1 DTS-HD Master
Audio and Dolby TrueHD
Maximum Video
Resolution
1920x1080@60H (1080p60)
4096x2160@60Hz 4:2:0 (4K)
Color Depth
1080p: 48bit | 4K: 24bit
Maximum Pixel Clock
HDMI: 600MHz
HDBaseT: 297MHz
Communication and Control
HDMI
HDCP 2.2 | EDID |
DVI/D supported with adapter (not
included)
HDBaseT
HDCP 2.2 | EDID | ARC | PoH | Bi-directional
IR and Ethernet
Ethernet
1x 8-pin RJ-45 female
WebUI | IP Control | Bi-directional over
HDBaseT
IR
1x IR Ext - 3.5mm (1/8in) Stereo
6/8x IR RX - 3.5mm (1/8in) Stereo
6/8x IR TX - 3.5mm (1/8in) Mono
Matrix Control | Bi-directional over
HDBaseT
RS-232
Matrix Control | Firmware Updates
Audio Return Channel
(ARC)
Returns audio to source location from
remote display via HDBaseT.Outputs 5-6
(6x6) or 6-8 (8x8) only
Power
Power Supply (Internal)
100~240V AC 50/60Hz
PoH
48V 15.4W
Max Power
Consumption
MX-0606-HDBT-H2: 88.6W
MX-0808-HDBT-H2: 90.6W
Copyright © 2015 WyreStorm Technologies |
MX-0606-HDBT-H2/MX-0808-HDBT-H2 Quickstart Guide | 160330
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
4 of 4
Environmental
Operating Temperature
32°F ~ 113°F (0°C ~ 45°C)
10% ~ 90%, non-condensing
Storage Temperature
-4°F ~ 158°F (-20°C ~ +70°C)
10% ~ 90%, non-condensing
Maximum BTU
MX-0606-HDBT-H2: 302.3 BTU/hr
MX-0808-HDBT-H2: 309.1 BTU/hr
Dimensions and Weight
Height
87.7mm/3.46in
Width
438mm/17.25in
Depth
396mm/15.6in
Weight
MX-0606-HDBT-H2: 8.2kg/18.04lbs
MX-0808-HDBT-H2: 8.48kg/18.66lbs
Regulatory
Safety and Emission
CE | FCC | RoHS
Troubleshooting
No or Poor Quality Picture (snow or noisy image)
• Verify that power is being supplied to the transmitter and receiving
device and that both devices are powered on.
Note:
When using PoH, to power the transmitter, verify that the HDBaseT cable
is properly terminated per the
• Verify that the transmitter supports the output resolution of the source.
See
.
• Verify that the receiving device and display support the output
resolution of the source.
• If transmitting 3D or 4K, verify that the HDMI cables used are 3D and/
or 4K rated.
• Verify that the HDBaseT cable is properly terminated per the
section.
• Verify that all source and HDBaseT connections are not loose and are
functioning properly.
No or Intermittent Matrix or 3
rd
party Device Control
• Verify that IR and RS-232 cable(s) are properly terminated per the
appropriate wiring section:
• IR:
• RS-232:
• Verify that the IR emitter is located over or near the IR sensor on the
device. Move the emitter closer or further from the sensor as the IR
signal can be too strong in some cases.
• Verify that the IR receiver is in line of sight of the hand-held remote.
Troubleshooting Tips:
• WyreStorm recommends using a cable tester or connecting the cable
to other devices to verify functionality.
• Use a flashlight to locate the IR receiver behind any tinted panels on
the device being controlled. It will likely appear as a small round disc.
