EDID Settings
EDIDs can be configured to resolve issues with video output on displays that may not accept the maximum resolution available from the source.
• When set to Smart EDID (default) the matrix will scan all selected displays for the lowest resolution to dynamically adjust the source content to allow output
on 2K and 4K displays sharing the same source.
• When EDID Copy or a direct EDID is being used, SmartEDID is turned Off.
• Ensure that a display is connected and powered On to the selected output before copying EDIDs or the copy will fail. When this occurs, EDID will be set to
4K@30Hz 2ch.
• Power to the matrix must be cycled (Off/On) after changing dip switches in order for the setting to take effect.
Copying EDIDs
1.
Set the EDID dipswitch to the
Front Panel, Web UI or API EDID Control
(all switches down).
2.
Reboot the matrix.
3.
Using the front navigation buttons, select the input port for the output.
Example: Input 2 for Output 2
4.
Once the output port indicator blinks, press and hold Enter for 5 seconds.
OK
indicates that the copy was successful,
FL-2
indicates that the copy
failed.
5.
Reboot the matrix.
Note:
EDID Copy feature is not available when Matrix in Smart EDID mode.
Accessing the Web UI
While the matrix will connect to a network out the box, it has a default static IP address that may interfere with other WyreStorm devices on the same network.
WyreStorm recommends changing the IP address of the matrix to one other than the default.
1.
Connect the matrix and the PC to the same network.
2.
Configure the PC to a 192.168.11.xxx IP address with a subnet of 255.255.0.0.
3.
Open a web browser and enter the IP Address of the matrix.
Default: 192.168.11.143 | Password: admin
4.
Login to the Installer Section by using the Installer Password
Default: admin
5.
Navigate to Advanced Setting> Network.
6.
Change the IP Address to match the range of the network and subnet mask or use DHCP.
7.
After updating the matrixes IP Address, configure the PC back to a 192.168.1.xxx IP address with a subnet of 255.255.255.0.
Copyright © 2016 WyreStorm Technologies |
MX-0404-H2 v2 | MX-0606-H2 v2 Quickstart Guide | 171005
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
3 of 4
SmartEDID/Front Panel/ Web UI
4K UHD
1080p
Smart EDID-Display Lowest
Resolution - 2ch only (default)
1 2 3
ON
4K @60Hz 2ch
No HDR
1 2 3
ON
1080p @60Hz 2ch
1 2 3
ON
Front Panel, Web UI or API EDID
Control
1 2 3
ON
4K @30Hz 5.1ch
With HDR
1 2 3
ON
4K @30Hz 7.1ch
With HDR
1 2 3
ON
4K @30Hz 2ch
With HDR
1 2 3
ON
4K @30Hz 8bit 2ch
No HDR
1 2 3
ON
