Copyright © 2021 WyreStorm Technologies |
CAM-200-PTZ Quickstart Guide | 210429
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
3 of 4
Troubleshooting
No or Poor Quality Picture (snow or noisy image)
• Verify that WyreStorm CAM-200-PTZ has been selected in your software’s device
settings
• Check Web UI settings for Video resolution and Frame rate to ensure
compatibility with your software
• Verify that the device is not in standby
• Verify that power is being supplied to the device
• Verify that all connections are not loose and are functioning properly
• Verify that the RJ-45 cable is properly terminated following EIA568B standard
Troubleshooting Tips:
• WyreStorm recommends using a cable tester or connecting the cable to other
devices to verify functionality.
Warranty Information
WyreStorm Technologies LLC warrants that its products to be free from defects in material and workmanship under normal use for a
period of five (5) years from the date of purchase. Refer to the Product Warranty page on
for more details on our limited
product warranty.
Default IP Address
192.168.11.43
Default HTTP Port
80
VISCA Control Port
5678
Setup and Configuration
Accessing the Web UI
This camera is set to a default static IP Address (192.168.11.43). In order to communicate with it initially the PC must be set to a 192.168.11.xxx address with a
subnet of 255.255.0.0. This can be changed back once a static IP is set within a different range.
1.
Connect the camera to the same network as a PC.
2.
Open a web browser and enter the IP Address of the camera.
Username: admin | Password: admin
Using Control Software
The CAM-200-PTZ can be controlled via the PTZ Camera Control software included in the WyreStorm Management
Suite. Connection can be made via LAN or RS-232 to test or troubleshoot camera functions.
