Getting Connected
⚠
CAUTION: Disconnect the power cord or power the unit off before making any connections to reduce risk of electric
shock and/or loudspeaker damage. NOTE: This is a true balanced amplifier. Never connect outputs to a ground point. Doing
so may cause damage to the amplifier and/or connected gear and also void the warranty.
1.
Power Switch
Use the rocker switch to power the amp on or off. Although leaving the amplifier always on should be ok, we
recommend turning equipment off when not in use, especially for long periods of inactivity. Powering the amp off
will also help protect against electrical surges and spikes.
2. Outputs
The WBT nextgen™ binding posts are some of the finest available. Use high quality speaker wire terminated as bare
wire or with bananas or spades.
3. Inputs
Either XLR or RCA interconnects may be used. For optimal performance, we recommend XLR.
4. AC Inlet
Attach the supplied or your own power cable here. Be sure to observe proper voltage. Use of a quality surge
protector is recommended to help prevent any damage from potential electrical events.
© Wyred 4 Sound. All rights reserved.
SX-1000R User Manual v1
5
