NetworkHD
™
200 Series AV Over IP H.264
Multiview Decoder
NHD-220-RX
Quickstart Guide
IMPORTANT! Installation Requirements!
• Visit the product page to download the latest firmware, document
versions, and the WyreStorm Maintenance Suite configuration tools.
• Install the latest firmware onto all NetworkHD devices in the system.
• NetworkHD requires a Layer 2 managed switch network with support
for Multicast & IGMP snooping enabled.
• NetworkHD uses AutoIP to assign IP addresses in the range of
169.254.x.x to encoders and decoders out of the box. The use of DHCP
addresses is not recommended. Errors in static IP settings can result
in a complicated reset procedure.
• WyreStorm highly recommends using our recommended switch
manufacturers. Configure all network switches to the exact
specification of the guides at
wyrestorm.com
prior to connecting any
NetworkHD devices.
• Due to the way H.264 compression encodes the video, interlaced video
sources are not recommended. Please use progressive scan sources
for best video quality - even at lower resolutions.
• WyreStorm recommends the use of the
NHD-000-RACK
for
installations containing multiple NetworkHD devices. Use of this
product provides an enclosure to mount and secure all NetworkHD
devices in a rack.
In the Box
1 x NHD-200-RX Main Unit
1 x Power Adapter (12V 1A DC)
3 x 3-pin Phoenix Connectors
2 x Mounting Brackets
1 x Quickstart guide (This Document)
Additional Information
The following information can be found on the
WyreStorm
website under
the
NHD-220-RX Product Page
.
• NetworkHD 100-200 Series Firmware
• NetworkHD 200 Series Installation Guide
• NetworkHD Switch Recommendations
• NetworkHD IP Switch Mapping Worksheet
• NetworkHD Switch Configuration Guides
• Drivers for Popular Control Systems
Copyright © 2016 WyreStorm Technologies |
wyrestorm.com
NHD-220-RX Quickstart Guide | 160330
North America: 518-289-1294 | EMEA/ROW: 44 (0) 1793 230 343
1 of 4
WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the
installation process.
Basic Wiring Diagram
The following diagram is provided to illustrate a typical basic system containing the NHD-220-RX.
Network Switch
NHD-220-RX
NHD-200-TX
NHD-200-TX
NHD-200-TX
NHD-200-TX
NHD-000-CTL
Ethernet
Ethernet
Ethernet
Digital Video
Digital Video
Digital Video
Digital Video
Digital Video
Media Player
Ethernet
Sattellite Box 1
Sattellite Box 2
PC
Satellite Box 1
Satellite Box 2
PC
Media Player
Digital Video/DVI/HDMI
Key
Ethernet
