WC-1414-48
Installation Guide
6-8mm
4
5
INSTALLATION INSTRUCTIONS
Installer must cut appropriately sized hole
in back of cabinet to accommodate existing
placement of hot & cold wall valves and drains.
1
2
Install the counter. Seal around
the top of the cabinet with clear silicone
sealant.
3
(1)
(2)
(3)
6
Install the mirror: use a pencil to mark the
placement of the screw holes on the wall
,
drill
the holes and insert the plastic wall anchors.
Install the screws into the wall anchors,
leaving enough of the screw exposed to hang
the mirror - approx 1/4" - 1/2".
Remove the handles from
inside the cabinet doors and drawers and
reinstall on the outside.Do not over-tighten
when reattaching.
Cut hole in back
of cabinet
Adjust the feet if needed.
