SI 675
Issue B
EDI 8262
Telescopic cranes with derrick pressure sensors CALIBRATION W2245
30
4.3.5 Aux Hoist Rope Limit
This is the maximum line pull permitted per part of line on the auxiliary hoist.
This value will be used as the load limitation as above when an auxiliary
hoist duty is selected.
4
.3
.6 Parts of Line (Falls)
Set the maximum number of parts of lines. This will apply to all hoists when
pressing the PARTS button, the number of parts will increase up to the set
number and return to one.
4
.3
.7 Rope De-rating
This value allows de-rating of the hoist line capacity when reeving with more
than one part. The total rope capacity will de-rate by the percent set except
for one part.
4
.3
.8 Block 1 Limit
This is the value that determines when the rigging mode is disabled for the
main hook. The load on the main hook must remain below double this value
to enable the rigging mode (see operator manual for more detail).
4
.3
.9 Block 2 Limit
This is the value that determines when the rigging mode is disabled for the
auxiliary hook. The load on the auxiliary hook must remain below double this
value to enable the rigging mode (see operator manual for more detail).
Data: #2
↑
- #4
↓
34 – Rope Aux : 1.0
Data: #2
↑
- #4
↓
35 – Max Parts : 4
Data: #2
↑
- #4
↓
36 – %/Part : 2.0 %
Data: #2
↑
- #4
↓
37 – Block 1 : 1.0
Data: #2
↑
- #4
↓
38 – Block 2 : 1.0
