Wuxi LingDe Microelectronics Co., Ltd.
13
The default speed magnet number is 1
，
The user can select it according to the actual situation by
the drop-down box.
Current and Voltage Settings
Click the
“
current and voltage
”
to enter the corresponding interface as below
：
The default of the battery capacity is 12Ah, users can select the battery capacity according to the
actual demand, slide left or right to reduce or increase the capacity of the battery;
The default of the full voltage is 36V; the user can choose the battery capacity according to the
actual demand, slide left or right to reduce or increase the full voltage v( *LD808UB does not
support);
The default of the low voltage is 31V; the user can choose the battery capacity according to the
actual demand, slide left or right to reduce or increase the low voltage, but low voltage must be
less than the full voltage;
Limited current, means the maximum discharge current of the battery, its default is 12A, the
user can select the maximum discharge current of the battery according to the actual demand,
slide left or right to reduce or increase the current limit;
The default of acceleration is 100%, the user can choose the acceleration value according to
actual demand, slide left or right to reduce or increase the acceleration value;(Bafang protocol
does not support)
The total number of assisted power setting
（
Bafang protocol does not support the power ratio
）
The total number of assisted power is 5 by default
，
the user can choose it according to actual
demand, the below shows the corresponding assisted power percentage. Slide up or down to
check all the percentage values of the assisted power. The latter percentage must be greater
than or equal to the previous one. The total number should be adjusted to the default value of
each assisted power.
