wurth ISS 35, Translation Of The Original Operating Instructions

Page: 17 / 176

5

Danger
First pull out the plug from the mains be-
fore carrying out any tasks on the ma-
chine.

Check cables, plugs, fuse, socket and elec-
trodes.

Turn on the appliance.

Empty the container.

Turn off the appliance and wait for 5 seconds,
turn it on again after 5 seconds.

Clean the electrodes as well as the space be-
tween the electrodes with a brush.

Remove blockages in the suction nozzle, suc-
tion tube, suction hose, or flat pleated filter.

Exchange the paper filter bag.

Ensure the filter cover properly locks into
place.

Clean or replace the membrane filter (special
accessory) under running water.

Replace the flat pleated filter.

Check drain pipe for leaks.

Check for proper installation of the flat pleated
filter.

Replace the flat pleated filter.

Clean the electrodes as well as the space be-
tween the electrodes with a brush.

Continuously check the filling level in case of
non-conductive liquid.

Suction hose is not connected.

Inform Customer Service

Inform Customer Service
–
We offer a warranty as per the legal/country-
specific regulations for this Würth vacuum
cleaner, valid from the date of purchase (proof
by invoice or delivery note). Damages will be
repaired by spare parts delivery or repair
work.
–
Damages that can be traced to natural wear,
overload or improper handling are excluded
from the warranty coverage.
–
Complaints can only be accepted if the vacu-
um cleaner is submitted to a Würth subsidiary,
to your Würth seller or a customer service cen-
tre for vacuum cleaners authorised by Würth.
–
Only use accessories and spare parts which
have been approved by Würth. The exclusive
use of original accessories and original spare
parts ensures that the appliance can be oper-
ated safely and troublefree.
–
You can download a copy of the current spare
parts list for this vacuum cleaner on the internet
at
"http://www.wuerth.com/partsmanager“ or
you can request one from your local Würth
subsidiary.
Troubleshooting
Suction turbine does not run
Suction turbine turns off
Suction turbine does not start again
after the container has been emp-
tied
Suction capacity decreases
Dust comes out while vacuuming
Automatic shut-off (wet vacuum
cleaning) does not react
Automatic filter cleaning is not work-
ing
Automatic filter cleaning cannot be
switched off
Automatic filter cleaning cannot be
switched on
Guarantee
Accessories and Spare Parts
1 7