12
701 135 BA 0103
Operating Controls
1
On/Off switch
2
Switch for manual/automatic operation mode
3
Socket for power tool
4
Filter dedusting lever
5
Brush inserts
6
Squeegee inserts
7
Flat pleated filter
8
Exhaust air filter
Not all of the accessories illustrated or described are included
as standard delivery.
Intended Use
The unit is designed for vacuuming dry, non-inflam-
mable, health hazardous dust from machines and
devices.
For damage caused by usage other then intended,
the user is responsible.
Before Use
Check for correct mains voltage:
The voltage of the
power source must match the voltage specified on
the nameplate of the machine. Equipment marked
with 230 V can also be connected to 220 V.
Fitting the paper filter bag (Figure A)
– Unlock and remove the suction head.
– Attach the paper filter bag.
– Replace the suction head and lock it in place.
Initial Operation
Switching On and Off (Figure B)
– Insert the power plug.
– Switch on the machine and start using it.
– In manual operation mode the switch
2
(Fig. C)
must be in the upper position.
Dry Vaccuming
Manual mode
During vacuuming it is not permitted to ever remove
the flat pleated filter.
A paper filter bag or a diaphragm filter (special ac-
cessories) can additionally be used to vacuum fine
dust.
Automatic mode (ISS 35-S and ISS 55-S)
– Plug the electric tool‘s power plug into the vacuum
cleaner (
3
, Figure C).
– Switch the unit on (
1
).
– The switch
2
must be in the lower position.
☞
The vacuum cleaner is automatically
switched on and off with the electric tool.
The vacuuming device has a start-up delay
of up to 0.5 s and a maximum running down
time of up to 15 s.
Electrical tools of 100 - 2200 W can be con-
nected to the unit.
– Adapt the connection sleeve to the electric tool's
terminal connection (Figure D).
– Remove the pipe bend from the suction hose
(Figure E).
– Mount the connection sleeve to the suction hose.
– Connect the connection sleeve to the electric tool
(Figure F).
Filter cleaner
Your vacuum cleaner is provided with a new type of
filter cleaner – especially effective for fine dust.
The flat pleated filter is automatically cleaned (puls-
ing sound) by an air blast if you press the remote
control at the hand grip for several seconds.
Switching on the filter cleaning system
(Figure G)
– Slide setting
4
- downwards
Actuate the filter cleaning system in regular in-
tervals, both during vacuuming operation and
when finishing work. The dust-producing pow-
er tool/machine is to be switched off during fil-
ter dedusting.
The filter cleaning system is continuously active,
when operating air and power tools with extreme
narrow vac port cross-sections. In this case, switch
off the filter cleaning system and use only for short
periods, as required.
ISS 35_55 - Buch Seite 12 Donnerstag, 8. März 2001 2:29 14