wurth H 22-SLE, Translation Of The Original Operating Instructions

Page: 12 / 102

12
Tool Specifications
Intended Use
The machine is intended for hammer drilling in con-
crete, brick and stone. It is also suitable for drilling with-
out impact in wood, metal, ceramic and plastic.
For damage caused by usage other than intended, the
user is responsible.
Symbols
Initial Operation
Setting the operating mode
The operating mode of the power tool is selected with
the mode selector switch
1
.
To change the operating mode, push the release but-
ton and turn the mode selector switch 1 to the
requested position until it can be heard to latch.
Note: Change the operating mode only when the
machine is switched off! Otherwise, the machine can
be damaged.
Rotary Hammer H 22-SLE H 24-MLE H 24-MLS
Article number 5708 200 X 5708 201 X 5708 202 X
Rated power input 700 W 750 W 750 W
Impact frequency at rated speed 0–4500 min
-1
0–4500 min
-1
0–4500 min
-1
Impact energy per stroke according
to EPTA-Procedure 05/2009 2.2 J 2.4 J 2.4 J
Rated speed 0–1250 min
-1
0–1250 min
-1
0–1250 min
-1
Tool holder SDS-plus SDS-plus SDS-plus
Spindle collar diameter 43 mm 43 mm 43 mm
Drilling diameter, max.
– Concrete
– Brickwork (with core bit)
– Steel
– Wood
22 mm
68 mm
13 mm
30 mm
24 mm
68 mm
13 mm
30 mm
24 mm
68 mm
13 mm
30 mm
Weight 2.4 kg 2.5 kg 2.6 kg
Class of protection II II II
Read all safety warnings and all
instructions
Warning
Before any work on the machine itself,
pull the mains plug.
Position for
hammer drill-
ing in concrete or stone
Position for drilling without
impact in wood, metal,
ceramic and plastic
(H 24-MLE
H 24-MLS)
Position for changing the posi-
tion of the chisel
The mode selector switch
1
does not latch in this position.
(H 24-MLE
H 24-MLS)
Position for chiselling
OBJ_BUCH-0000000083-001.book Page 12 Tuesday, August 14, 2012 9:40 AM