2. Configure the mini evaluation board as sink
a) Open the Wirepas Commander PC tool, available for free download at this page:
https://www.we-online.com/web/en/electronic_components/produkte_pb/SW
b) Select the right COM port of the Thetis-I evaluation board and press the "Open/-
Close COM port" button.
Figure 1: Open COM port
c) Configure the connected Thetis-I evaluation board as sink of the network: go to
the "CSAP" tab and set
• the node address to a unique address.
• the address of the network to 7.
• the channel of the network to 39.
• the node role to "SINK".
Figure 2: Configure the sink
d) Start the radio stack on the "MSAP" tab.
Figure 3: Start the sink
3. To make other Thetis-I mini evaluation board units join this Wirepas network, connect
them to the PC in the same way.
4. Configure these mini evaluation boards as routing nodes taking part in the Wirepas
network consisting of the previously configured sink device.
a) Open further instances of the Wirepas Commander.
b) Select the right COM port of the Thetis-I evaluation board and press the "Open/-
Close COM port" button (see figure
Thetis-I Mini Evaluation Board user manual version 1.0
© February 2021
www.we-online.com/wireless-connectivity
8
