Würth MLLG18, Translation Of The Original Operating Instructions

Page: 13 / 136

13
Technical data
Art. 5709 300 110
Laser type 520 nm
Laser classification 2 M
Number of laser crosses 4
Laser cross on ceiling

Downward laser point

Number of laser lines 3
Visibility
Up to 50 m (depending on ambient light)
Beam pulsing for operation with hand-held
receiver

Working range with hand-held receiver Up to 80 m
Visual alarm if out of levelling range

Thread for tripods 5/8"-11
Power supply Li-ion batteries or C cells
Operating time of battery 7 - 32 hours
Levelling range ± 4°
Accuracy:
Horizontal accuracy ± 1.0 mm / 10 m
Vertical accuracy ± 1.5 mm / 10 m
Charge the battery
Note
If the battery capacity falls below 15 %,
the operating indicator [4] goes red.
■
Charge the batteries (charging socket
[8]
is at
the bottom on the side of the device).
■
The battery pack must only be charged
when installed in the device. Use only the
approved mains adapter, Würth item number
5709 300 103 to charge the battery pack.
Note
You can exchange battery power packs
for charged battery power packs or use
non-rechargeable batteries.
3
The LEDs at the charging socket is on during
charging.
Start-up (Fig. I)
■
Protect the device against moisture
and direct sunlight.
■
Do not expose to extreme tempera-
tures or temperature changes.
■
E.g. do not leave it in a car for longer periods of
time. Before using, allow the device to acclima -
tise if has been exposed to high temperature
changes. Extreme temperatures or temperature
changes can impair the accuracy of the device.
■
Protect the device against hard shocks
or drops.
■
After heavy impacts, always check the
device for accuracy before using it again.