Würth eiSos Series, User Manual, Page: 11 / 26

4 Running Sensors SDK sample application on the
Raspberry Pi
This chapter explains the steps involved in running the sample applications of the Sensors
SDK on the Raspberry Pi platform.
4.1 Hardware connections
For creating custom applications on the basis of the Raspberry Pi, connect the pins of the
sensor evaluation board to corresponding pins on the Raspberry Pi (power supply, ground,
I
2
C). Figure
2
gives an overview of the pins of the Raspberry Pi used in the driver application
examples. Refer to the respective user manuals of the evaluation boards for further details.
Figure 2: Pinout of 40-pin GPIO header of Raspberry Pi 3B
For example, figure
3
shows a block diagram for connecting a sensor via I
2
C interface to
Raspberry Pi.
Sensors SDK, User manual
Version 1.1
© October 2019
www.we-online.com/sensors
10