14
screw and the entire tool are in axis during the operation. During
the job, always use the tool from point X and not from the M16
screw.
If you use the tool from the M16 screw it will not
work as it should and could get damaged.
INSERTION
:
• Fit silentblock onto screw and place it with head on washer
with bearing 1952 006 506 (ref. A); get screw onto other side
of support and position milled washer 1952 006 556 (ref.
F); screw nut M12, checking that everything is aligned before
screwing (fig. 11).
• Oil silentblock (and, before, seat) and use two 30 mm wrenches
to rotate nuts. Keep screwing until silentblock is fully inserted.
9
10
11
F
H
G
E
X
A
C
C
F
D
