33
19. RESTORINg THE FAcTORy SETTINgS
You can reset the wall thermostat to its initial state. This will
clear all the settings that have been made manually.
• Hold down the mode button for more than 3 seconds.
• Use the setting wheel to select the “rES” menu item.
• Confirm with OK.
• “ACC” will appear on the display; press OK to confirm.
20. cHILD-pROOF LOcK/OpERATINg INHIBIT
Operation can be inhibited.
• To activate/deactivate the operating inhibit, briefly press the
“Mode” and
buttons at the same time.
• After activation, “LOC” will appear on the display.
• To deactivate the function, press both buttons again.
21. SETTINg THE HEATINg BREAK
If the heating is turned off during summer, the batteries in the ra
-
dio energy-saving controllers can be saved. To achieve this, the
valves are opened fully and the calcification protection function
continues to run. Radio commands from window contacts or
remote controls are no longer executed.
• To activate the heating break, turn the setting wheel clock
-
wise during manual operation (
Manu
) until “On” appears
on the display.
• To terminate the heating break quit manual operation
(
Manu
) or turn the setting wheel anticlockwise.
BDA_Funk-Wandthermostat_0886500212.indd 33
04.10.2010 15:53:17