Würth 0827 940 16X, Translation Of The Original Operating Instructions

Page: 8 / 82

8
Operation
Charging the battery
Notes regarding operation
The switched-on lamp is very bright and the lamp
may get hot in the vicinity of the light outlet. When
the lamp is switched on:
• do not look directly into the light outlet.
• ensure that nobody is exposed to glare.
• do not cover the light outlet.
• do not put down the lamp with the light outlet
pointing downwards.
• Before taking the hand lamp into service for the
first time charge it for 6-8 hours
• Fully charge the hand lamp before it is stored for
a longer period.
• Switch lamp off during charging.
• Remove the protective cap from the connector
(4) and connect the cable or charger.
• Connect the power supply to the mains socket
(100-240 V~).
• The indicator light (2) of the lamp switches to
RED during charging.
• If charging is completed, the indicator light (2)
of the lamp switches to GREEN.
• If the indicator light (2) does not turn
CONSTANT RED, unplug the charger and then
try again.
• Do not charge the battery longer than required
to prevent overheating.
• Disconnect the charger and attach the protective
cap for connector (4).
GB
5. On/Off switch – 1. step: Spot light
1. Light output – Spot light and main light
2. Indicator light
3. Hook - extandable
4. USB connection – power supply and USB-cable
for charging the lamp included in the delivery
2. step: Main light
1
1
4
3
5
1
12
Technical data
Art. 0827 940 16 X
Number of LEDs: 42 +1, 7 +1W
Li-Ion, 3. 7 V,2 6 00mAH,
9.62 Wh
Lamp input voltage/
current consumption:
5 V 1 A
Charging time: approx. 3.5 hours
Operating time (main light): 3.5 hours
Operating time (spot light): 9 hours
LED intensity (main light): 45 0 lm
LED intensity (spot light): 10 0 lm
Service life of LED: up to 10000 hours
Degree of protection: IP 65
Storage temperature: –20 °C to + 45 °C
Operating temperature: –10 °C to +40 °C
Operating voltage
power supply unit:
100-2 3 0 V~ / 50-60 Hz