Würth 0702 048 100, Translation Of The Original Operating Instructions, Page: 8 / 76

8
Proper use
The device is designed for making screw connec-
tions in the lower shell of trapezoidal roofs using the
original Würth system accessories.
Any other use than that described shall be deemed
to be improper use.
The user is liable for damage due to
improper use.
Device elements
Overview (fig. I / II)
1
Handle
2 Screwdriver
3
Lance
4 Attachment
5
¼" Bit (size 25, length 120 mm)
6 Drive spindle
7
Adjustment ring
8 Guide rail
9
Strip guide
10 Belt strip
11
Screw length setting
Technical data
Screwdriving attach-
ment VSG 48 DB
Art. 0702 048 100
Weight 1.7 kg
Number of screws per belt 50
Screw length 4.8 x 20
Accessories and spare parts
In the unlikely event of a failure or defect, have the
device examined and repaired by a Würth master
Service workshop.
In all your queries and spare part orders, always
quote the product number (see type plate) of your
device.
The current spare parts list of the device can be
viewed online at http://www.wuerth.com/partsman-
ager. Alternatively, contact your local Würth agency
for a hardcopy.
Designation Prod. no.
Drive spindle [6] 0702 048 101
Handle [1] 0702 048 102
¼" bit [5] 0702 048 103
ZEBRA
®
Self-drilling screw,
DBS Pan Head belted
0200 148 20
Assembly (fig. I)
■
Insert the screw bit [5] into the drive spindle [6]
and push back the connection piece of the
holding sleeve as shown in the illustration.
■
Insert the drive spindle
[6]
into the bit socket of
the screwdriver [2] and push forward the con-
nection piece of the holding sleeve.
■
Insert the drive spindle [6] with screw bit [5]
into the lance [3] with attached handle [1] and
attachment
[4]
.
■
Tightly fasten the lance [3] to the screw-
driver
[2]
using the handle
[1]
.
■
Tighten the setting screw of the clamp.
3
The device is now ready for use.