DSP-LCD
Product information
Page 2 of 2
Subject to technical changes DSP-LCD_V1.2.0_PI_2018-01_EN
Software revision and validity of documentation
Software version
V1.2.0 2018-01
Documentation
status
Any software versions not listed are special solutions for individual projects and are not described in detail in this document.
This document automatically ceases to be valid if a new technical description is issued.
Manufacturer:
Wurm GmbH & Co. KG Elektronische Systeme, Morsbachtalstraße 30, D-42857 Remscheid
For further information, see our website at
www.wurm.de
Installation
Install the remote display in a section of a refrigeration unit panel or of a separate control box in the
cold room.
Next plug the connector plug into the corresponding socket of the field module until it audibly clicks
into place.
Installation section dimensional drawing
Technical data
Power supply
From field module or DSP-Booster
Display
3-digit 7-segment display, LCD
Connection
By prefabricated cable
Dimensions
(WxHxD) 62 x 29 x 18mm
Fastening
In installation section (56 x 25mm)
Ambient temperature
Operation: -25...+55°C, storage: -25...+70°C
Weight
About 20g
CE conformity
2014/30/EU
(EMV-Richtlinie)
EAC conformity
TR ZU 020/2011
RoHS II
Valid from
Version 1.2.0
Note!
Please observe the detailed descriptions in the chapters of the FRIGOLINK system
manual.
