DSP-LCD
Product information
DSP-LCD_V1.2.0_PI_2018-01_EN Subject
to technical changes
Page 1 of 2
Front view
Remote display for cold locations in thermometer cut-out
Black RAL 9004
Grey RAL 7035
Features
Display of representative wares temperature of the associated field module
Status displays for defrost, fan and alarm
Snap-in installation in refrigeration units
Secure connection via prefabricated calbe (ZCB) to FKV003, FKL003, CRD-XP and CRDP-XP
Available housing options:
DSP-LCD-BK: Black RAL 9004
DSP-LCD: Grey RAL 7035
Writing conventions
Symbol Meaning
WARNING!
Avoid the described hazard: otherwise there is danger from
electric voltage
that could lead to death or
serious
physical injury.
For your safety
For safe operation and to avoid personal injury and equipment damage through operating error,
always read these instructions, become familiar with the device, and follow all safety instructions on
the product and in this document, as well as the safety guidelines of Wurm GmbH & Co. KG
Elektronische Systeme. Keep these instructions ready to hand for quick reference and pass them on
with the device if the product is sold.
Wurm GmbH & Co. KG Elektronische Systeme accepts no liability in case of improper use or use for
other than the intended purpose.
Target group
These instructions are intended for "service technicians".
Intended use
The DSP-LCD is a remote display for cold locations.
WARNING!
Danger to life from electric shock and/or fire!
Connection of the device should be carried out only by a qualified electrician!
Use only the correct tools for all work!
Never expose the device to moisture, for example due to condensation or cleaning
agents!
Take the device out of operation if it is faulty or damaged and is therefore compromising
safe operation!
Do not open the device!
Do not repair the device yourself! If required, send it in for repair with an exact
description of the fault!
