Vend statistics with coin systems acc. to BDV standard
International L – edition: 17.02.2006
46
EXAMPLE: Display of total turnover (SP 5, button 1 + 2):
Press key S five times, display shows
Press selection button 1.
The four higher value digits of the total are displayed, e.g.
The display indicates that the current total comes to less than
100.00 EURO.
Push key C and then selection button 2.
This display shows
This indicates that the turnover comes to 35.80 EURO.
Finally leave the service program (
You can call up other data in the same manner (SP stands for service programme):
ATTENTION! The IVC unit retrieves this data from the BDV coin system. It only will update the
counters shown in the table if the 'BDV audit' feature is switched on. Therefore it should be set at
least 04 in service program 11, button 7 (05 is factory preset),
and table
on
.
13.4
Individual resetting of counters
When the sum concerned is displayed by pushing the respective button you only need to press key
P to reset the counter. The display is set to 0000. To complete the job, press key C and proceed to
the next issue.
Please remember that the statistics counters are displayed in two parts, which means you have to
reset both, the higher-value display and the lower-value display, individually.
not
resetable
resetable
Turnover
SP 5, button 1/2
SP 6, button 1/2
Cash box contents
SP 5, button 3/4
SP 6, button 3/4
Change paid out
SP 5, button 5/6
SP 6, button 5/6
Inventory of change return tubes
SP 5, button 7/8
SP 6, button 7/8
Sales during ‘INSERT EXACT MONEY‘
SP 3, button 1/2
Vends with discount
SP 3, button 3/4
Credit invloved in unclear issues
SP 3, button 5/6
Manually filled tube contents
SP 3, button 7/8
Manually gathered change
SP 4, button 1/2
Total of change paid in excess
SP 4, button 3/4
05 NOT RESETABLE
COUNTERS
SELECTION:
01 =0000
SELECTION:
02 =3580
