CHECKING THE BAR AND REEDS
The reed bar in the Electronic Piano must float freely on the twc
rubber washers located at each end of the bar. Be sure the two
large bar mounting screws on each end are Nor screwed down tight
against the rubber washers. There should be at least 1/64" space
between the head of the screws and the rubber washers.
(See
Fig. 700-G.)
�-------===:--=-=-=--==----·-,=--;
I
I
LeA'5s
3Ae..
Tf2EBLE' BAie.
MT�. screEWS
MT�. SCl?EWS
Fig. 700-G
IMPORTANT - A new soale of reed dimensions, differing from the 112,
has been incorporated into the Models 120 and 700; therefore, all the
reeds are not interchangeable with reeds of former models. For further
instruction, see Paqe 700-29.
700-11
scanned by tropical fish
tropicalfishvintage.com
