Installation manual for Indian Scout Bobber from model year 2018
• Revision: 00 • 24/11/2020 •
© ABM Fahrzeugtechnik GmbH
Page 6 of 7
All cables and electric wires must be laid in a manner which prevents them from bending or getting
pulled during spring deflection movements and which adequately protects them against rubbing.
After all the work has been completed, make sure you check the complete electrical system.
After completing the work, check that all components and screws are tight and functioning
correctly. Afterwards, a test drive must be done! After completing the test drive, the tightness of all
screw connections must be checked, as well as the adequate freedom of access of all moving parts.
Fasten the holder to the handlebar using cable ties.
Attach the cover to the holder with the screws provided.
Stick the pin into the notch and remove the protective
film.
4
Final check
