WUNDER SA.BI.SRL EN USER MANUAL
RS 300 REV.01 10/01/2017 11
11. WARNING INFORMATION
1.Low battery indication This warning show that the voltage of battery is very low, please change
a new one.
2. The loading is over limit when power on, please reduce the loading.
3. The loading is under limit when power on, please increasing the loading.
4. Over load or Counting error
–
The loading is over limit when power on, please reduce the loading and try again. If the
trouble is still exist, please call the service.
5. Counting error (too low)
–
The loading is lower than limit when power on, please increase the loading and try again. If
the trouble is still exist, please call the service.
。
6.EEPROM error--
The programs of the scale is error, please call the service.
12. CLEANING & MAINTENANCE
We would recommend using alcohol based wipes or similar when cleaning the scales. Please do not use
large amounts of water when cleaning the scales as this will cause damage to the scales electronics, you
should also refrain from using corrosive liquids or high pressure washers. Always disconnect the scales
from the mains power supply before cleaning.
The machine is sold approved with first metrological test passed (plate with green M). If required, the first
periodic test (green label) can be performed by the manufacturer. At the expiry date indicated on the green
label, the periodic test must be performed on the machine. Subsequent calibration is always necessary, if
one or more safety markings are damaged or the display shows abnormal weights. Always have maintenance
performed by qualified personnel. The WUNDER customer technical support service is at your disposal.
ATTENTION!
In some countries, calibration can be performed only by an authorised/qualified agent. Contact your dealer for
further
13. DISPOSAL OF THE SCALE
EU 2002/96/EC
This product complies with EU Directive 2002/96/EC. The symbol of the barred waste basket shown on the
appliance indicates that this product, which, must be treated separately from domestic refuse at the end of
its useful lifetime, must be taken to a differentiated collection centre for electrical and electronic devices, or
returned to the dealer when a new equivalent device is purchased. The user is responsible for taking the
appliance to the appropriate collection facility at the end of its lifetime. Appropriate differentiated collection
for submitting the used appliance to environmentally compatible recycling, treatment, and disposal helps to
