WUNDER SA.BI.SRL EN USER MANUAL
960A R150A RG200 REV.10 15/01/2017 7
11. ASSEMBLING-USING THE HEIGHT ROD (OPTIONAL)
FOR THE R150A- RG200A MODEL
Using the mechanical telescopic height rod
WARNINGS!
TO MEASURE THE HEIGHT THE PATIENT MUST STEP ONTO THE SCALE FOOTBOARD
RG200A: manual telescopic height rod
Figure 1: in the packaging the height rod support is already assembled on the instrument. Simply secure the height rod with the
screw
Figure 1a-1b: secure the height measuring rod to the black abs support by tightening the screw in the height rod hole
Fig. 1
Fig. 1a
Fig. 1b
USING THE TELESCOPIC HEIGHT ROD
Measurements higher than 131 cm
Measurements lower than 130 cm
1
Raise the headrest lever
1
Lower the headrest lever
and press the central black
clamp
2
Position horizontally
2
While holding down the
black clamp, lower the
headrest lever
3
Lower the rod to where the
headrest lever
touches the patient's head.
The height can be read at point
"A"
3
Lower the rod to where the
headrest lever touches the
patient's head.
The height can be read at
point "B"
