wuma BTA-120N, Operation Manual, Page: 2 / 2

1. Connection
2. Reset
Long press the home screen.
This product and
application are
opened and
connected.
Select the device
and press
Connect to
confirm.
When the connect-
ed state appears,
press Connect to
enter the new work
item.
Select operation
mode
and parameter
setting.
After setting,
press Save.
Select the work
item and press OK
to return to the
main screen.
Go back to the
main screen and
start using it.
PRECAUTIONS
DIMENSIONS
MAINTENCE AND STORAGE
1. Clean this tool by wiping with a clean cloth after operation and storage in a dry environment.
Do not dip any type of liquid in this tool. This may damage the internal of this tool.
2. This tool should be recalibrated a period of 1 years, or 5,000 cycles, whichever occurs first.
To contact with local vendor, an authorized repair center for supporting.
E-mail:matatakitoyo@gmail.com
www.matatakitoyo.com Made in Taiwan
MATATAKITOYO TOOL CO., LTD.
No. 63, Ln. 493, Sec. 3, Zhongshan Rd., Tanzi Dist.,
Taichung City 42754, Taiwan
TEL : 886-4-2533 5893
Manufacturer
Nov. 2021
01
Edition
1 Years
5000 Times
Unit : mm
L1
H
L
L L1
BTA-120N
BTA-200N 12~120 Nm
20~200 Nm 9~90 ft-lb
15~150 ft-lb
3/8”
1/2” 3/8”
1/2” 19
22
88
92 56.5
56.5 189.7
220.0
G
H
42
42
W B
42
42
ITEM NO.
Range A
Output
Square
90°
A
W
B
Output Square
Note : Please refer to the instructions for operating the tool application.
APP
This product can choose modes: peak, batch, block and tracking four modes.
Before using the products, please
confirm the wrench, torque adapter and
socket which is a mutually vertical state,
and then you can use the wrench.